LP 100R Laser Printer Operator's Guide Appendix B: Managing Files
Rev: 1 Page B-16 April, 2014
of 60 pages
To Active
1. Select To Active from the Manage Archive Fonts menu and press Enter.
2. The following screen displays:
Figure B-12. Move fonts from archive to active directory.
3. Using the Up and Down buttons, select each font that is to be moved from
the archive directory to the active directory, pressing Select after each font
selected.
Note: When Select is pressed, an asterisk (*) displays to the left of the font
selected for deletion.
4. If any font selected to move to the active directory is not to be moved:
a. Reselect the font.
b. Press Select.
c. The asterisk (*) to the left of the font name is erased, and the font is not
moved to the active directory.
5. When all fonts to be moved from the archive directory to the active directory
have been selected, press Enter.
To Next Page
Loading...
