LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-5 April, 2014
of 128 pages
Supervisor Menu
Supervisor Menu Access
1. If the POWER LED is not green, press it for approximately 1 second and
release.
2. Press Menu to display the Main Menu.
3. Select Advanced from the Main Menu.
4. Select Supervisor from the Advanced Menu.
5. If password protection is enabled, the following screen displays, and it will be
necessary to enter a valid password on the numeric keypad to gain access to
the Supervisor Menu:
Figure 6-1. Password-protection enabled.
If you do not have access to the required password, see your supervisor.
To Next Page
Loading...
