SATO LP 100R - Audible Alarm; Safety Considerations

LP 100R Laser Printer Operator's Guide Chapter 5: Problem Solving
Rev: 1 Page 5-3 April, 2014
of 30 pages
Figure 5-2. Graphic error message II.
Note: The specific component to be checked is included in this display.
Audible Alarm
Most printer errors will cause the audible alarm to sound until the error is cleared.
To turn off the alarm while resolving the problem, press the BEEP button.
Safety Considerations
Before working on the printer, make certain that the printer is installed as
described in Appendix G: Operating/Environmental Requirements.
Error code
Component
to be
checked
Source of
the problem