LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-40 April, 2014
of 128 pages
3. Press the Up or Down triangle to move the selection bar to the desired status,
either Disabled or Enabled.
4. Press Enter, which stores the status selected and returns the system to the
Supervisor Menu.
Change Password Function
The Change Password function allows you to change the current password to a
new number.
Change Password Function Access
1. Press the Up or Down triangle on the Supervisor Menu to move the selection
bar to the Change Password function.
2. Press Enter, which causes the following screen to display:
Figure 6-28. Change Old Password.
To Next Page
Loading...
