LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-106 April, 2014
of 128 pages
KodescriptPlus
1. Press the Up or Down triangle on the Emulation Settings menu to move the
selection bar to the KodescriptPlus function.
2. Press Enter, which causes the following menu to display:
Figure 6-78. KodescriptPlus menu.
Field Check – Indicates how KodescriptPlus Field Check information should be
displayed:
- OFF
Do not display Field Check information
- ON the TDU
Default: [ON Panel]
Display Field Check information on the TDU
- ON RS-232
Send Field Check information to the RS-232 Port
- ON Monitor
Display Field Check information on a monitor connected to the METO-Logic
Controller
To Next Page
Loading...
