SATO LP 100R - Light Image; Dark Image

LP 100R Laser Printer Operator's Guide Chapter 5: Problem Solving
Rev: 1 Page 5-13 April, 2014
of 30 pages
Light Image
Checking item Result Remedy
1 Is the printing form damp? Yes Replace
2 Is the OPC drum exhausted in
service life?
Yes Replace
3
Is the image density setting
correct?
No Correct
4 Is the fusing glass dirty? Yes Clean
5 Is the AIDC sensor dirty? Yes Clean
6 Is the fusing lamp exhausted
in service life?
Yes Replace
7 Is the OPC Drum completely
grounded?
Yes Clean or replace the OPC
drum ground plate
Dark Image
Checking item Result Remedy
1 Is the OPC drum exhausted in service life? Yes Replace
2 Is the image density setting correct? No Correct