SATO LP 100R - Test Prints Function; Test Prints Function Access

LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-9 April, 2014
of 128 pages
Test Prints Function
This function allows you to evaluate print quality and test printer configurations
before they are saved.
Test Prints Function Access
1. When the Supervisor Menu displays, press either the Up or Down triangle to
move the selection bar to the Test Prints function.
2. Press Enter, which causes the following Test Prints menu to display:
Figure 6-3. Test Prints menu.
3. The functions that can be selected from the Test Prints menu include:

1
/
10
" Grid
 Character Fill
 Font Sampler
 Placement Test
 Page Coverage
 User Files
 Font Detail
Note: Test Prints can not be printed on paper that is less than 8½" wide.
Because some Test Print patterns extend across standard 14½" paper when
printed, we recommend 14½" paper be used when printing any test pattern to
avoid missing part of the print data for that pattern.