LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-48 April, 2014
of 128 pages
Set Time Zone
This allows you to set the GMT (Greenwich Mean Time) to the applicable GMT
Offset Time.
1. Press the Up or Down triangle on the Supervisor Menu to move the selection
bar to the Time function.
2. Press Enter, which causes the following Time menu to display:
Figure 6-36. Time menu.
3. Press the Up or Down triangle on the Supervisor Menu to move the selection
bar to the Set Time Zone function.
4. Press Enter, which causes the following Set Time Zone screen to display:
Figure 6-37. Set Time Zone screen.
5. Press Enter, which sets the GMT Offset Time and returns the system to the
Supervisor Menu.
To Next Page
Loading...
