SATO LP 100R - Archive to USB

LP 100R Laser Printer Operator's Guide Appendix B: Managing Files
Rev: 1 Page B-23 April, 2014
of 60 pages
Archive To USB
1. Select Archive To USB from the Manage Archive Fonts menu and press
Enter.
2. The following screen displays:
Figure B-20. Copy font Archive To USB selected.
3. Using the Up and Down buttons, select each font to be copied to a flash drive,
pressing Select after each font selected.
Note: When Select is pressed, an asterisk (*) displays to the left of the font
selected.
4. If any font selected to be copied is not to be copied:
a. Reselect that font.
b. Press Select.
c. The asterisk (*) is erased, and the font is not copied to the flash drive.
5. When all fonts to be copied to the flash drive have been selected, press Enter.