LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-91 April, 2014
of 128 pages
Orientation
The Orientation setting specifies, in clockwise rotation, the image as it is to be
printed on the document.
Note:
The Orientation setting can not be changed when a print job is in progress.
This function is not used in Kodescript or KodescriptPlus.
1. Press the Up or Down triangle on the Printer Setup menu to move the
selection bar to the Orientation function.
2. Press Enter, which causes the following Orientation screen to display:
Figure 6-70. Orientation screen.
Note:
• Brackets ( [ ] ) around a specific Orientation indicate that it is the Default
Configuration Orientation.
• An arrow () pointing to a specific Orientation indicates that it is the type
assigned to the currently displayed configuration.
To Next Page
Loading...
