Need help?Do you have a question about the SATO LP 100R and is the answer not in the manual?
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Print Resolution | 203 dpi (8 dots/mm) |
| Print Speed | 4 ips (101.6 mm/s) |
| Max. Print Width | 104 mm (4.09 inches) |
| Media Width | 25.4 mm - 114.3 mm (1 inch - 4.5 inches) |
| Media Thickness | 0.06 mm - 0.18 mm (0.0024 in - 0.007 in) |
| Supply Roll Diameter | 127 mm (5 inches) max. |
| Ribbon Length | 300 m (984 feet) |
| Supported Barcode Types | Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Codabar, POSTNET, PDF417, Data Matrix, QR Code, MaxiCode |
| Power Requirements | 100-240 VAC, 50/60 Hz, 1.5A |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
To Next Page
