SATO LP 100R - Maintenance Area

A P P E N D I X A
A-3
1.1.3.2 Printer Clearance Requirements (Maintenance Area)
Figure A-2 illustrates a printer top view showing the minimum clearance required to maintain and
repair the LP 100R printer. Taking into consideration the width and depth dimensions of the
printer, a space approximately 9’ (2.74 M) X 9’ (2.74 M) is required.
PRINTER
PRINTER
EP
DRAWER
Maintenance Area
9 feet
( 2.74 Meters)
9 feet
(2.74Meters
)
Figure A-2