SATO LP 100R - Page 54

A P P E N D I X A
A-2
1.1.3 Clearance Requirements
1.1.3.1 Printer Size
Figure A-1 illustrates a front and top view of the printer that provides its overall dimensions as well as the
height and total clearance required when the front and left side covers are fully opened.
Figure A-1 also provides proper media loading distance 13" from the media to the Suction Brake Unit.
Figure A-1
600mm(23 5/8")
1000mm (39 3/8") 1000mm (39 3/8")
1185mm (46 5/8")
720mm (28 3/8") 136mm (5 11/32")
330mm (13")
66mm (2 5/8")
720mm (28 3/8")
940mm(37 1/16")
1000mm(39 3/8")
PRINTER