SATO LP 100R - Front Door; Toner Bottle Access Cover; EP Holder; Touch Display Unit (TDU)

LP 100R Laser Printer Operator’s Guide Chapter 2: Printer Components
Rev: 1 Page 2-8 April, 2014
of 12 pages
Front Door
 Protective cover for components housed in the front area of the printer.
 Causes an Interlock error if left open during processing.
Toner Bottle Access Cover
 The cover swings down, providing access to the toner bottle, thereby allowing
replacement of toner without interrupting processing.
 An Interlock error message is displayed if the cover is left open during
processing.
EP Holder
 Slides open, providing easy access to the main charger unit, the developer
unit, and the OPC cartridge (see Figure 2-5).
 An Interlock error message is displayed if the EP holder is left open during
processing.
Touch Display Unit (TDU)
 A visual unit that displays both text and graphics.
 Includes the Off button (Soft Power switch), which is used to power down the
printer.
 Provides the required operator control over the printing, configuration, and
configuration elements.
 Used by service personnel when executing printer Setup and/or Diagnostic
functions.
Figure 2-4. Touch display unit.
Toner Bottle
Feeds toner into the chamber, which in turn supplies toner to the printer.