LP 100R Laser Printer Operator’s Guide Chapter 2: Printer Components
Rev: 1 Page 2-9 April, 2014
of 12 pages
Page Counter
Seven-digit counter that counts the number of pages processed in 11" increments.
Service Cover
Is reserved for use by service personnel.
Left-Side Door
Serves as a protective cover for the fuser unit.
Causes an Interlock error if left open during processing.
Toner Fuser Filter
Filters and traps the toner accumulated as a by-product of the Fusing function.
(See page 2-7 for the location of the toner fuser filter.)
Swing Guide (Optional Component)
Assists the smooth fanfolding of continuous forms as they are fed out of the
printer and onto the stacker table.
Removable Stacker Table
Catches and supports printed documents in fanfold fashion as they are fed out
of the printer.
As the weight of the documents starts to build, the stacker table automatically
lowers until it is full.
When full, it prompts the operator to remove the printed documents from the
table and then raise the table to its original position.
When the stacker table is at its lowest position, it can be rolled away from the
printer and moved to a more convenient location for removing the printed
documents.
It is then rolled back to its proper position and height.
Adjustable Foot
One of four feet that are used to level the printer as well as to prevent it from
rolling.
Waste Toner Collecting Bottle
Collects used toner so that it can be easily and safely discarded.
To Next Page
Loading...
