LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-103 April, 2014
of 128 pages
Error Recovery
The Error Recovery setting indicates whether the printer should try to reprint a
page that was not successfully printed (e.g., because of a paper jam).
Note: The Error Recovery setting can not be changed when a print job is in
progress.
1. Press the Up or Down triangle on the Printer Setup menu to move the
selection bar to the Error Recovery function.
2. Press Enter, which causes the following Error Recovery screen to display:
Figure 6-76. Error Recovery screen.
Note:
• Brackets ( [ ] ) around a specific Error Recovery indicate that it is the Default
Configuration Error Recovery mode.
• An arrow () pointing to a specific Error Recovery indicates that it is the Error
Recovery mode assigned to the currently displayed configuration.
To Next Page
Loading...
