SATO LP 100R - Kodescriptplus Warnings

LP 100R Laser Printer Operator's Guide Chapter 5: Problem Solving
Rev: 1 Page 5-26 April, 2014
of 30 pages
KodescriptPlus Warnings
Code Description Explanation
16 Unknown/Unsupported
KodescriptPlus Format
command
Either an unknown or an unsupported Format
command has been included in the KodescriptPlus
program.
17 Unknown/Unsupported
KodescriptPlus Data
command
Either an unknown or unsupported Data command
has been included in the KodescriptPlus program.
18 Incorrect KodescriptPlus
Format command syntax
The syntax for a KodescriptPlus Format command
contains the wrong number of characters.
19 Incorrect KodescriptPlus
Data command syntax
The syntax for a KodescriptPlus Data command
contains the wrong number of characters.
20 Incorrect KodescriptPlus
Hard Data command
syntax
The syntax for a KodescriptPlus Hard Data command
contains the wrong number of characters.
21 Unknown parameter An unknown parameter was included in the syntax for
a command.
22 Illegal character
encountered during
program processing
The program includes a character other than a white
(transparent) character.
23 Illegal Hex Conversion The Hex Conversion command (~?) was followed by
an invalid hexadecimal value.
24 Invalid Filename The Filename does not conform to the KodescriptPlus
document Filename conventions.
25 Filename must follow The Filename either was not entered or was entered
out of sequence.
26 Maximum font name
length has been exceeded
The font name was longer than the maximum
permitted length (49 characters).
27 Interchangeable print
font
The Interchangeable Print Font command (^Df) was
coded without entering the name of the print font
selected. The previously called font will be used.
28 Image file requested not
found
The requested PCX Image file either is not stored in
the specified directory, or it exceeds the maximum
number of 10 Image files allowed.
30 Data exceeded field’s
defined length
The number of characters to be printed in a field
exceeds the maximum number of characters
permitted for that field. The remaining characters will
be truncated.
Continued on next page