LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-75 April, 2014
of 128 pages
Lines Per Inch
The Lines Per Inch setting specifies, in text lines, the number of lines per inch and
character height per line to be printed on the document.
Note: The Lines Per Inch setting can not be changed when a print job is in
progress.
1. Press the Up or Down triangle on the Printer Setup menu to move the
selection bar to the Lines Per Inch function.
2. Press Enter, which causes the following Lines Per Inch screen to display:
Figure 6-58. Lines Per Inch screen.
Note:
• Pressing CL after entering numeric data deletes 1 digit each time it is
pressed.
• The number of lines per inch can be expressed only in Text Lines.
Current
number
per inch
To Next Page
Loading...
