SATO LP 100R - Page 188

LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-74 April, 2014
of 128 pages
4. The print width can be increased or decreased in 2 different ways:
 Enter the new print width on the numeric keypad and then press Enter.
or
 Move the Up or Down triangle (to increase or decrease the print width)
and then press Enter.
Note:
 Pressing Enter after any Printer Setup function has been executed saves the
function. However, it does not store the function.
 When the configuration completes, press Back until the Store Configuration
screen displays, and then follow the procedures for executing the Store
function (see page 6-63).