LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-21 April, 2014
of 128 pages
User Files
The User Files function prints a list of the user-installed files on the hard drive of
the printer, including files in both the archive and active directories.
Note: The User Files can not be printed while a print job is in progress.
1. Press the Up or Down triangle on the Test Prints menu to move the selection
bar to the Print User Files function.
2. Press Enter, which causes the following screen to display while the User Files
are printing:
Figure 6-15. User Files.
3. To terminate printing, press Clear.
4. When printing is terminated, the system returns to the Supervisor Menu.
5. Press Feed until the printed form completely ejects from the printer.
To Next Page
Loading...
