SATO LP 100R - Page 79

LP 100R Laser Printer Operator's Guide Chapter 4: Printer Maintenance
Rev: 1 Page 4-19 April, 2014
of 24 pages
5. Remove the OPC drum.
6. Install the new OPC drum.
Note:
 To avoid damages, do not touch the OPC drum. (Handle only by the
edges.)
 Use the supplied cleaning pad or other suitable item to shield the OPC
drum. Exposing it to light for more than a brief period of time results in
degradation.
7. Re-install the OPC cartridge into the original position.
Note: To avoid damage, do not touch the OPC drum.
OPC
drum
Cleaning pad
OPC
drum