LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-64 April, 2014
of 128 pages
3. If updates to the current configuration are to be stored:
a. Press Enter, which causes the audible alarm to sound and the following
screen to display:
Figure 6-51. Overwrite Configuration screen.
Note: The Default Configuration (000) can not be overwritten.
b. If Enter is pressed, the updated changes will overwrite the old data stored
on the printer’s hard drive, and the system will return to the Configuration
menu.
c. If Back is pressed, the system will return to the Configuration menu
without storing the updated changes.
To Next Page
Loading...
