LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-65 April, 2014
of 128 pages
4. If a new configuration is to be stored:
a. Enter the desired configuration number on the numeric keypad.
b. Press Enter, which causes the audible alarm to sound and the following
screen to display:
Figure 6-52. Store Configuration screen.
c. If Enter is pressed, the configuration will store on the printer’s hard drive,
and the system returns to the Configuration menu.
d. If Back is pressed, the System returns to the Configuration menu without
storing the configuration.
To Next Page
Loading...
