SATO RFID - Command Structure for RFID Control; EPC Code Write Designation Command (NEW)

RFID User Guide 9 PN: 9001147D
COMMAND STRUCTURE
This chapter provides the command sequences applicable to establishing RFID control through the use of an
external host device instead of through the printer’s integrated operator panel.
EPC CODE WRITE DESIGNATION COMMAND (NEW)
FUNCTION
Writes EPC code in RFID supply that supports EPC code.
FORMAT
<ESC>IP0e:z,d:xxxxxxxxxxxxxxxxxxxxxxxx;
PARAMETER
x= EPC data
EXAMPLE
<ESC>A
<ESC>V50<ESC>H50<ESC>XMTESTTEXT
<ESC>IP0e:z,d:123456781234567812345678;
<ESC>Q1
<ESC>Z
NOTES
If the EPC code cannot be coded into the tag, an error message will print.