SATO RFID - EPC Trade Mark Print Command

RFID User Guide 11 PN: 9001147D
EPC TRADE MARK PRINT COMMAND
FUNCTION
Specifies the print of EPC trademark on a tag label.
FORMAT
<ESC>TMx
PARAMETER
x = Logo ID number 0 1
EXAMPLE
<ESC>A
<ESC>V50<ESC>H50<ESC>TM1
<ESC>Q1
<ESC>Z
NOTES
Rotation <ESC>% and Enlargement <ESC>L are also available.
Specify the command Enlargement <ESC>L right before <ESC>TM in case of its usage.
The original print area is of 143W x 101H dots (without the designation of enlargement).
When parameter “x” is left blank, logo “1” will be printed.