First edition: Mar 2015 Q04652700
©2015 SATO CORPORATION
UHF RFID Configuration Guide
Thank you for choosing a SATO RFID Printer. This
guide will help configure the printer to encode your
inlays.
1 Determine Printer Orientation.
2 Examine Labels to determine printer
settings.
3 Set up printer.
Menu Settings
4 Set Labels and Carbon Ribbon.
5 Confirm operation by printing/encoding a
label.
Five Easy Steps of RFID Configuration
Refer to the S84-ex Operator Manual for more
information.
You can access the S84-ex Operator Manual from the
website for your region linked from.
1 Determine Printer Orientation.
Americas: Standard/Right Hand
Europe/Asia: Left Hand
Americas: Opposite/Left Hand
Europe/Asia: Right Hand
Media feed direction Media feed direction
Refer to the S84-ex UHF Inlay Configuration Guide for what measurements you should take and
what they mean, as well as a list of inlays and their required configurations.
Menu Settings:
Adjust the Write Power and Read Power according to required levels on the list of the S84-ex UHF
Inlay Configuration Guide.
Refer to the sticker on the printer’s top cover and the Operator Manual for more information.
Be sure to read the data and check that it is correctly encoded.
2 Examine labels.
3 Set up printer.
4 Set Labels and Carbon Ribbon.
5 Confirm operation by printing/encoding a label.
Press the ENTER button to
enter RFID USER MODE
menu
For details on the RFID menu
items, refer to next page.
1. Turn on Power 2. Printer Comes Online 3. Switch to Offline
(Line button on the
Operator Panel)
4. Enter Menu
(Enter button on the
Operator Panel)
5. Select “RFID USER
MODE”
(Arrow button on the
Operator Panel)
To Next Page
Need help?
General
