SATO WS212 - Printer Lights; Status Lights

1 Introduction Printer lights
6
1.4 Printer lights
There are two LED lights that show the status of WS2 Series printer. The
Upside light is defined in LED2. LED1 is below LED2 and Feed symbol.
1.4.1 Status lights
Status lights help you check printer’s condition. The following tables show
the blinking speed of status lights and the conditions they indicate.
Symbol
Blinking Speed
Blinking Interval
**
Fast
0.5 Second
*
Slow
2 Seconds
* LED2 + *LED1
Slow
LED2 & LED1 Blinking Interval at same time
* LED2 + LED1*
Slow
LED2 & LED1 Blinking Interval at different
timing
LED 2
LED 1
Description
Green
Green
The printer is ready to print.
Green
** Green
The printer is transmitting data.
* Green
* Green
In pause.
* Green
Green *
The printer is writing data to the flash or USB memory.
The USB memory is being initialized.
Green
Orange
Head high temperature.
Green
* Orange
The RTC battery is low. (If the printer has a built-in RTC)
Green
** Orange
The print module is opened when the printer is turned on.
Orange
Orange
Paper jam.
** Orange
** Orange
The media is out when the print data is sent to the printer.