Need help?Do you have a question about the SATO WS412TT and is the answer not in the manual?
General| Print Technology | Thermal Transfer / Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Print Speed | 6 ips |
| Max. Print Width | 4.1 inches (104 mm) |
| Media Type | Fanfold |
| Media Thickness | 0.06 to 0.19 mm |
| Media Roll Diameter | 5 inches (127 mm) |
| Ribbon Length | 450 m |
| Processor | 32-bit RISC CPU |
| Interfaces | USB, RS232, Ethernet |
| Dimensions | 231 x 289 x 341 mm |
| Operating Temperature | 41 to 104°F (5 to 40°C) |
| Media Width | 0.5 to 4.5 inches (12.7 to 114.3 mm) |
| Ribbon Width | 1.0 to 4.3 inches (25.4 to 109.2 mm) |
Explains symbols used for safe printer operation and property protection.
Explains the meaning of different LED status light combinations and blinking patterns.
Describes how to enter system mode to select and run commands using LED indicators.
Step-by-step instructions for connecting the printer's power supply and cord to a power source.
Guidance on the correct procedure for powering the printer on and off.
Instructions and precautions for cleaning the printer's printhead to ensure optimal print quality.
To Next Page
