Need help?Do you have a question about the SATO E series and is the answer not in the manual?
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Max. Print Speed | 6 ips (inches per second) |
| Max. Print Width | 4.09 inches (104 mm) |
| Interfaces | USB, Ethernet |
| Media Type | Labels, Tags, Ticket |
| Ribbon Length | Up to 984 ft (300 m) |
| Power Supply | AC 100-240V, 50/60 Hz |
| Print Resolution | 203 dpi |
Details commands for generating various standard bar code symbologies.
Controls label cutting intervals within a print job with a cutter unit.
Defines commands to initiate and terminate print jobs correctly.
Specifies printing date and time fields from the printer's internal clock.
Allows setting the printer's internal clock and date.
Prepares Expanded Memory areas for data storage by clearing existing data.
Designates the format parameters for Data Matrix 2D barcodes.
Prints sequential numbered Data Matrix symbols with incrementing values.
Defines custom command codes for printer communication.
Configures printer parameters like print speed, darkness, and sensors.
Sets operating parameters for the RS232 serial interface.
Details the protocol for checking printer status via ENQ/ACK/NAK commands.
To Next Page
