SATO E series User Manual

Section 6: Configuration Commands
Page 6-4 SATO Programming Reference
Printer Setting
COMMAND STRUCTURE
<ESC>PCaa,a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z
<ESC>PCaa,bb
aa = Setting to be changed (01 to 26). Only relevant setting can be c
SETTING
(ASCII)
COMMAND
PARAMETER
ASCII
VALUE
DESCRIPTION
01 a 0 Reserved
02 b 0 Reserved
03 c 0 Print Speed, 2 ips (50 mm/s)
03 1 Print Speed, 3 ips (75 mm/s)
03 2 Print Speed, 4 ips (100 mm/s)
03 3 Print Speed, 5 ips (125 mm/s)
03 4 Print Speed, 6 ips (150 mm/s)
03 5 Print Speed, 8 ips (200 mm/s)
03 6 Print Speed, 10 ips (250 mm/s)
03 7 Print Speed, 12 ips (300 mm/s)
04 d 0 Reserved
05 e 0 Not Used
05 1 Not Used
05 2 Not Used
06 f 0 Dispense Mode, Backfeed after print
06 1 Dispense Mode, Backfeed before print
07 g 0 Reserved
08 h A Print Darkness Range A
08 B Print Darkness Range B
08 C Print Darkness Range C
08 D Print Darkness Range D
08 E Print Darkness Range E
08 F Print Darkness Range F
09 i 1 Print Darkness Level 1
09 2 Print Darkness Level 2
09 3 Print Darkness Level 3

SATO E series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	6 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Interfaces	USB, Ethernet
Media Type	Labels, Tags, Ticket
Ribbon Length	Up to 984 ft (300 m)
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi