SATO Programming Reference Page A-1
APPENDIX A.
COMMAND CODE QUICK REFERENCE
Instruction Description Page
A Start Code. Begins all print jobs 2-66
A1aaaabbbb Media Size. Specifies the label size. 2-46
aaaa = Label length in dots (0 to Vmax)
bbbb = Label width in dots (0 to Hmax)
A(space)Z Form Feed. Feeds a blank tag or label. 2-33
AR Normal Print Length. This command resets the printer to the Standard
print length (7 inches).
2-52
A3H-aaaa
-Vbbbb
Base Reference Point. Establishes a new base reference point
position for the current label. Units of measurement are dots.
2-10
- = Optional character.If included, will shift reference point
in negative direction.
aaaa = Horizontal reference point
bbbb = Vertical reference point
Babbcccd Bar Codes. Prints a 1:3 ratio bar code. 2-2
a = 0 Codabar
1 Code 39
2 Interleaved 2 of 5 (I 2/5)
3 UPC-A/EAN-13
4 EAN-8
5 Industrial 2 of 5
6 Matrix 2 of 5
7 reserved
8 reserved
9 reserved
AMSI
B reserved
C Code 93
D reserved
EUPC-E
F Bookland
G Code 128
I UCC 128
To Next Page
Loading...
