SATO E series User Manual

Section 4: Expanded Memory Commands
SATO Programming Reference Page 4-3
Fonts, TrueType Recall
Command Structure <ESC>BJRabbccddeeffffgg...g
<ESC>BJT,aa,bb,cc,dd,ee,ffff,gg...g
a
aa
bb
cc
dd
ee
f f f f
gg..g
=
=
=
=
=
=
=
=
Font ID (0 thru 9)
Font ID (00 thru 99)
Horizontal Expansion (01 thru 12)
Vertical Expansion (01 thru 12)
Character Pitch (01 thru 99)
Reserved, always 00
Number of characters to be printed using the font
Data to be printed
Example: <ESC>BJR1020201000004SATO
Placement: Immediately following the <ESC>CC Slot Select
command.
Default: None
Command Function This command recalls previously stored bit mapped TrueType fonts from
Expanded Memory.
Printer Input <ESC>A
<ESC>V0100<ESC>H0100<ESC>CC1<ESC>BJT,1,02,02,01,00,0004,SATO
<ESC>Q1<ESC>Z
Printer Output
Special Notes 1. TrueType fonts are stored in a fixed size bit mapped format by this
command.

SATO E series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	6 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Interfaces	USB, Ethernet
Media Type	Labels, Tags, Ticket
Ribbon Length	Up to 984 ft (300 m)
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi