SATO E series User Manual

Section 4: Expanded Memory Commands
Page 4-4 SATO Programming Reference
Fonts, TrueType Store
Command Structure Begin Download
Download
End Download
<ESC>BJ( aa...abb..b
< ESC>BJDcccccddddee...e
<ESC>BJ)
aa..a
bb..b
ccccc
dddd
ee...e
=
=
=
=
=
40 byte font description
10 byte date information
Memory offset (hexadecimal)
Number of data bytes to be stored (0001-2000)
Font data to be downloaded
Example: <ESC>BJ({50 byte header}<ESC>BJD{5 byte hex
memory offset}{data}<ESC>BJ)
Placement: Immediately following the <ESC>CC Slot Select
command.
Default: None
Command Function This command allows bit mapped TrueType fonts to be stored in a
Expanded Memory
Printer Input The download data stream is very complex and it is recommended that
the True Type Dowload utility program be used instead of
manuallycreating the required command and data stream.
Printer Output The is no printer output as a result of this comand. See <ESC>BJR True
Type Font Recall command.
Special Notes 1. This command requires the Expanded Memory option. See your
SATO representative for details.
2. The SATO True Type Download utility program can be used to auto-
mate the download process from a computer running Windows 3.1 or
above. For a copy of this utility program contact your SATO represen-
tative.

SATO E series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	6 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Interfaces	USB, Ethernet
Media Type	Labels, Tags, Ticket
Ribbon Length	Up to 984 ft (300 m)
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi