SATO E series User Manual

Section 4: Expanded Memory Commands
Page 4-18 SATO Programming Reference
Status
Command Structure <ESC>BJS
Example: <ESC>BJS
Placement: After the <ESC>CC Memory Area Select command.
Default: None
Command Function Casues the printer to print the card status.
Printer Input <ESC>A
<ESC>CC1<ESC>BJS
<ESC>Z
Printer Output
Special Notes 1. This command requires the Expanded Memory option. See your
SATO representative for more information
2. The following information is provided on the status label:
Line 1: Memory size in Kbytes
Line 2: The ID number assigned with the <ESC>BJF command
Line 3: Number of formats stored and bytes used
Line 4: Number of graphics stored and bytes used
Line 5: Number of PCX files and bytes used
Line 6: Number of bit-mapped TT fonts stored and bytes used
Line 7: Number of BMP files stored and bytes used
Line 7: Remaining free memory
Line 8: Max expandable print length

SATO E series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	6 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Interfaces	USB, Ethernet
Media Type	Labels, Tags, Ticket
Ribbon Length	Up to 984 ft (300 m)
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi