Section 3. Calendar Commands
SATO Programming Refernece Page 3-5
Special Notes 1. The date and time elements may be placed in any order for
printing.
2. Use a slash (/) to separate date elements and a colon (:) to
separate time elements.
3. The font for the date/time elements must be specified before
this command.
4. The printer’s internal clock may be set through the Calendar
Set command.
5. This command can be used up to six times per job.
6. The Copy (<ESC>WD), Mirror Image (<ESC>RM) or
Reverse Image (<ESC>/)commands cannot be used with
this command.
7. Up to 16 characters can be used with this command.
8. Century ranges are: For Year = YY, any year equal to or
greater than 80 and less than or equal to 99, then the century
equals 19 For Year specified as YYYY=1999, and printed as
<ESC>WAYY, will be equal to 99.
9. The Julian date is the accumulated day from January 1st to
the current date. The first day of the year is January 1st (001)
and the last day of the year is December 31st (365 or 366 for
leap years).
10. The TT command should not be specified for printing in
numeric only bar codes.
To Next Page
Loading...
Need help?
General
