SATO E series User Manual

SATO Programming Reference Page 4-1
SECTION 4.
EXPANDED MEMORY OPTION COMMANDS
These commands require the optional Expanded Memory..
Note: Before Expanded Memory can be used for the first time, it must be initialized
using the <ESC>BJF command. If it is not initialized, the printer will not recognize the
memory and respond as if no expanded memory was installed.

SATO E series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	6 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Interfaces	USB, Ethernet
Media Type	Labels, Tags, Ticket
Ribbon Length	Up to 984 ft (300 m)
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi