SATO E series User Manual

SATO Programming Reference Page 3-1
SECTION 3.
CALENDAR COMMANDS
The following commands in this section are used to control the Calendar Functions.The Calendar
Functions require the Calendar Option (except for the “Se” print engines which include it in the
standard configuration).

SATO E series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	6 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Interfaces	USB, Ethernet
Media Type	Labels, Tags, Ticket
Ribbon Length	Up to 984 ft (300 m)
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi