SATO E series User Manual

Section 4: Expanded Memory Commands
SATO Programming Reference Page 4-17
Memory Area Select
Command Structure <ESC>CCa
a = Memory Area
1 Memory Area 1
2 Memory Area 2
Example: <ESC>CC1
Placement: Immediately following the <ESC>A Start Code.
Default: Last selected Memory Area.
Command Function Selects the Memory Area to be used for following Expanded Memory
commands.
Printer Input <ESC>A
<ESC>CC1
{commands}
<ESC>Z
Printer Output There is no printer output as a result of this command.
Special Notes 1. This command requires the Expanded Memory option. See your
SATO representative for more information.
2. The Memory Areas specified by this command may be reversed
using the LCD menu/configuration panel.
3. Unless otherwise modified via the LCD menu/configuration panel
(see the printerspecific Operational Manual), CC1 selects the
PCMCIA Expanded Memory and CC2 selects the internal
Expanded Memory.

SATO E series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	6 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Interfaces	USB, Ethernet
Media Type	Labels, Tags, Ticket
Ribbon Length	Up to 984 ft (300 m)
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi