Section 4: Expanded Memory Commands
SATO Programming Reference Page 4-5
Format/Field Recall
Command Structure <ESC>YR,aa<ESC>/D,bb,cc....c
aa
bb
cc...c
=
=
=
Format number to be recalled (01-99)
Field number to be recalled (01-99)
Data to be placed in the recalled field.
Example: <ESC>YR,01<ESC>/D,01,99
Placement: Immediately following the <ESC>CC Slot Select
command.
Default: None
Command Function To recall a field from a stored format and place new data in the field.
Printer Input <ESC>A
<ESC>CC1
<ESC>YR,02<ESC>/D,01,TWO FIELDS OF<ESC>/D,02,VARIABLE DATA
<ESC>Q1<ESC>Z
Printer Output
Special Notes 1. This command requires the Expanded Memory option. See your
SATO representative for details.
2. Only one format can be recalled at a time. However, multiple feilds
can be recalled from the same format.
3. The number of data characters contained in the “cc...c” field cannot
exceed the value designated in the <ESC>/N Field Store command.
If it does, the data will be truncated to fit the field length defined in the
store command.
To Next Page
Loading...
