SATO E series User Manual

Appendic B. Bar Code Specifications
Page B-22 SATO Programming Reference
CODE 128 CHARACTER TABLE
The Code 128 Table lists 105 data values for the three subsets: A, B, and C. Each subset
column displays either a single column of data or a double column of data.
• If the subset column displays a single column of data, that is the data to be entered to
produce the result.
• If the subset column displays a double column of data, the first column contains the
desired output, and the second column contains the actual characters to be entered.
For example, look at value 99 in the table:
If you are currently using Subset A or Subset B, you can change to Subset C by encoding
“>C”.
• Note: When Subset C is chosen, you must specify an even number of data positions
because of the interleaved encodation method.
VALUE SUBSET A SUBSET B SUBSET C
99 Subset C >C Subset C >C 99
100 Subset B >D FNC4 >D Subset B >D
101 FNC4 >E Subset A >E Subset A >E
102 FNC1 >F FNC1 >F FNC1 >F

SATO E series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	6 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Interfaces	USB, Ethernet
Media Type	Labels, Tags, Ticket
Ribbon Length	Up to 984 ft (300 m)
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi