SATO E series User Manual

Section 5: Two-Dimensional Symbols
Page 5-6 SATO Programming Reference
Sequential Numbering
Command Structure <ESC>FXaaabcccdddeee
aaa = Number of duplicate labels to be printed (001 -999)
b = Increment or Decrement
+ = Increment
- = Decrement
ccc = Increment/Decrement Steps (001 - 999)
ddd = Sequential numbering start position (001 - 999)
Referenced to left side.
eee = Incremented data length measured from start position
(001 - 999)
Placement: Immediately following the <ESC>BX Data Format
designation command and preceding the <ESC>DC
Print Data Command.
Default: None
Command Function To print sequential numbered Data Matrix symbols.
Printer Input <ESC>A
<ESC>V0100<ESC>H0100
<ESC>BX03081010000000001
<ESC>FX002+001005003<ESC>DC000060000
<ESC>Q4<E SC>Z
Printer Output
Label Set #1

SATO E series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	6 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Interfaces	USB, Ethernet
Media Type	Labels, Tags, Ticket
Ribbon Length	Up to 984 ft (300 m)
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi