3 Printer operation Self test
23
1. Version Information
The firmware version and its build date.
2. Standard RAM
Display SDRAM size.
3. Available RAM
RAM is able to be used.
4. Flash Type
The flash memory type and size.
5. Available Flash
Flash is able to be used.
6. No of DL soft fonts (FLASH)
The number of fonts is downloaded in Flash.
7. No of DL soft fonts (RAM)
The number of fonts is downloaded in RAM.
8. No of DL soft fonts (HOST)
The number of fonts is downloaded in USB HOST.
9. H. Position Adjust
Move the print position horizontally.
10. Sensor Type
Two kinds of media sensor type, reflective sensor and see-through sensor.
11. Label-less Calibration Value
Check if a label-less calibration has been performed on the printer. If not,
the value is 0000.
12. RTC Time
The default format is month/day/year (hour:minute:second). If your printer
has a built-in RTC, the RTC time shows here.
13. Max Label Height
The max label length you can print at a time. For 200 dpi models, it is 100
inches; for 300 dpi models, it is 50 inches.
14. Print Width
Display the print width in dots.
15. Lab Len (Top to Top)
For non-continues media, it is the length between the tops of two labels.
16. Speed
To Next Page
Loading...
