Sauder Carson Forge 416969 - Step 26: Attach Keyboard Uprights; Fasten keyboard uprights (G) to tops (H, I)

Step
416969www.sauder.com/services
Pae 31
Step 26
å
Fasten the KEYBOARD UPRIGHTS (G) to the TOPS (H
and I). Tihten four TWIST-LOCK® FASTENERS.
å
NOTE: The surfaces with TWIST-LOCK® FASTENERS
on the UPRIGHTS should face each other.
How to use the SAUDER TWIST-LOCK
®
FASTENER
1. Insert the dowel end of the FASTENER into the
hole of the adjoinin part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoinin
part while lockin the FASTENER.
2. Tihten the FASTENER with a Phillips
screwdriver as tiht as possible.
Dowel end
H
I
G
G
Roller end