Sauder Carson Forge 416969 - Step 1: Initial Fastener Installation; Assemble unit on carpeted floor

Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratchin your unit or the fl oor.
å
To bein assembly, push a SAUDER TWIST-LOCK®
FASTENER (7F) into the lare holes in the
KEYBOARD UPRIGHTS (G).
416969 www.sauder.com/servicesPae 6
7F
Do not tihten the TWIST-LOCK® FASTENERS in this step.
G
G