20
104605 E 07/99
CHANGING GAS TYPE
Note : Conversion to a different type of gas is only
possible with category II2H3+ appliances !
Conversion to a different type of gas must only be
carried out by a specialist registered with the GVU
or specialist authorised by Unical.
A different gas jet is required for the conversion.
Conversion units and their order numbers are shown
in our current price list.
Performing the conversion
● Remove the front cover of the appliance.
● Loosen the upper gas union and unscrew the gas
jet
● Screw the new jet in tightly after checking it again
for size ant tighten the union once more
● Check the union for tightness using leak detector
spray
● After the details accordingly on the plate showing
gas type.
Conversion to a different type of gas only for ECOSY
24 E and ECOSY SB 24 E :
Note : The appliances are normally supplied with
the desired type of gas.
Gas conversion units for other types of gas must be
ordered separately.
Detailed instructions for gas conversion are enclosed
with these conversion units and must always be
followed.