Multistat Smart Thermostat Deployment Guide (CLI-W210x/W200x) 20 of 21 45 Perseverance Way, Hyannis MA 02601
009-1959-00 | 200723 Savant.com | 508.683.2500
Appendix B: Network Requirements
For a full overview of Savant's networking guidelines, see the Savant Device Networking Guidelines reference guide on the Savant Community.
Network Changes
Savant recommends performing the following to refresh the IP connection after connecting to a new network, changing routers, or if the IP address range is
changed in the current router. This will reset any IP connection and ensure that the device is communicating with the network correctly.
From the On-Screen Display:
1. Select the Mode icon (O, AUTO, HEAT, COOL) at the bottom of the main window
of the LCD display.
2. Swipe left twice to navigate to the NETWORK window.
3. Select the CHANGE button and in the Select Network To Connect screen that
opens, and select the new network and follow the prompts to enter the password
and connect to the new network.
To Next Page
Loading...
Need help?
General
