Savant CLI-W210 User Manual

Multistat Smart Thermostat Deployment Guide (CLI-W210x/W200x) 4 of 21 45 Perseverance Way, Hyannis MA 02601
009-1959-00 | 200723 Savant.com | 508.683.2500
1. Before You Begin
Multistat Smart Thermostat and Hardware ...................................................................................................................................................................................................................
Savant Control System running da Vinci 8.8 or higher .............................................................................................................................................................................................
HVAC system installed and appropriate wires run to the thermostat’s location(s) ......................................................................................................................................
OPTIONAL: Remote sensors and their associated wiring installed .....................................................................................................................................................................
Ethernet network meeting Savant requirements ........................................................................................................................................................................................................
See Appendix B: Network Requirements or refer to the Savant Device Networking Guidelines reference guide on the Savant Community.
Read through this document in its entirety and ensure that the following items are either available or installed before proceeding with deployment. The list
below can be used to check o items as they are completed prior to installation.
To successfully deploy the thermostat and associated sensors, follow the steps below. Use this list to check o items as they are completed.
2. Deployment Steps
Wire the Thermostat
1. Connect the HVAC Signaling Wires to thermostat. See Wiring Diagrams ...............................................................................................................................................
Blueprint Configuration
2. Add thermostat to a Blueprint configuration. See Add thermostat to a Blueprint Configuration .................................................................................................
3. Upload Blueprint Configuration. See Save Configuration, Generate Services, and Upload File .....................................................................................................
4. Add Thermostat to the Local Network. See Wi-Fi Network..........................................................................................................................................................................
Configure Thermostat for a standard HVAC System
5. Use the on-screen menus to configure thermostat. See Basic Configuration Using the On-Screen Menus .............................................................................

Savant CLI-W210 Specifications

General

Brand	Savant
Model	CLI-W210
Category	Thermostat
Language	English