Need help?Do you have a question about the SBE SB-36 and is the answer not in the manual?
General| Brand | SBE |
|---|---|
| Model | SB-36 |
| Category | Transceiver |
| Language | English |
Overview of the SB-36 transceiver, its modes, frequency range, and features.
Detailed technical specifications for the SB-36 transceiver, including ranges and capabilities.
General guidelines for setting up the SB-36 transceiver, including placement and ventilation.
Instructions for connecting the transceiver in a fixed station setup, including power and grounding.
Guidance on selecting and connecting antennas for optimal performance with the SB-36.
Information on using linear amplifiers with the SB-36, including connection and control.
Introduction to operating the SB-36, referencing front/rear panel controls and procedures.
Step-by-step guide for operating the SB-36 receiver, including tuning and gain adjustments.
Procedure for tuning the transmitter of the SB-36, covering plate and load controls.
Instructions for operating the SB-36 in CW mode, including keying and power adjustment.
Overview of the SB-36 transceiver's internal components and signal paths.
Detailed explanation of the signal path and components within the SB-36 transmitter.
Describes the RF signal path through the SB-36 receiver stages.
Explains the function and operation of the noise blanker circuit in the SB-36.
Details the AGC circuit's role in maintaining constant receiver signal levels.
Explains the frequency mixing concepts employed in the SB-36 transceiver.
Describes the operation of the frequency counter circuit within the SB-36.
Details the components and function of the SB-36's companion AC power supply.
Introduction to maintenance procedures, including preventative and corrective actions.
Guidelines for routine preventative maintenance tasks to ensure reliability.
Procedures for cleaning the exterior and interior components of the SB-36.
Guidance on lubricating moving parts and potentiometers for optimal operation.
Methods and steps for diagnosing and resolving issues with the SB-36 transceiver.
Methods and steps for diagnosing and resolving issues with the SB-36 transceiver.
Reference table for DC voltages and signal injection points for troubleshooting.
To Next Page
