SBE SB-36 OPERATION MANUAL
3.0 OPERATION
3.1 OPERATING INSTRUCTIONS
3.1.1
The front and rear panel controls, connectors and indicators used in
operating the SB-36 are shown in Figures 3.1 and 3.2 and are
described in Table 3.1. The descriptions given in the table are not
intended to be operating instructions, but only a reference to determine
the function of each stern. The actual transceiver operating procedures
will be covered in Sections 4.1 through 4.3.
FIGURE 3.1 SB-36 FRONT VIEW
NoobowSystems Lab. Tomioka, Japan 2003 http://www.noobowsystems.com/ Page 11 / 56