SBE SB-36 OPERATION MANUAL
1.2 SPECIFICATIONS
1.2.1 General
Frequency Range
3.50 - 4.00 MHz
7.00 - 7.50 MHz
14.00 - 14.50 MHz
21.00 - 21.50 MHz
28.00 - 30.00 MHz
Frequency Accuracy Nixie tube Read-out, accurate to within +100 Hertz
on all bands
Dimensions Transceiver: 13 - 1/4 inches wide
7-1/4 inches high
l2-1/2 inches deep
Power Supply: 6 inches wide
7-1/4 inches high
l2-1/2 inches deep
Weight Transceiver:29 pounds
Power Supply: 15-1/2 pounds
1.2.2 Transmitter
Power Input SSB 500 watts, P.E.P.
CW 400 watts
Primary Input Voltage 115/220 VAC, 50/60 Hertz
PA cooling Fan Built. in to PA compartment
Carrier Suppression -50 db
Distortion Products -30 db
Modes of Operation USB,LSB or CW. Selectable frown front panel on
all frequencies.
Unwanted Sideband -50 db, @ 1kHz
Antenna impedance 50-100 ohms unbalanced
VSWR Not to exceed 2:1
Audio Band Width 300-2700 Hertz @ 6 db
Sideband Rejection Filters Crystal lattice, 9 MHz
Power Conscription Single Tone Output - 550 watts
Front Panel Meter Indicates Plate current (Ip), Relative RF Output
and ALC
NoobowSystems Lab. Tomioka, Japan 2003 http://www.noobowsystems.com/ Page 7 / 56
To Next Page
Loading...
